Description

The CA-1500 bracket is manufactured from aluminum alloy with correspondingly high mechanical strength. Its unique patented design has been developed to propose a universal fitting covering all installation situations on wooden, metal or concrete poles :

• •Suspension of running out rollers 

• •Stay systems 

• •Cross-arm installation 

• •Dead-ending of single, double or triple parallel lines. 

• •Dead-ending of several drop wires. 

• •Jointing points

• • Angle points

• • Derivation points
• Installation
• •With steel bands
The ca-1500 bracket can be installed on any type of pole – drilled or undrilled – with two 20x0.7 mm stainless steel bands C201 plus two buckles HC-20-T (check our pole banding products). Usually allow two bands of one meter each per bracket. 

• •With bolts
If the top of the pole is drilled (wooden poles, occasionally concrete poles) the ca-1500 bracket can also be secured with bolt. The bolt length should be at least equal to the pole diameter + 50 mm (bracket thickness).